I have (3) TiVo's connected at home, 2 of which are in the same location as the Slingbox. I have had my original Series 1 TiVo connected all along to my Slingbox, via the Composite connection. After downloading 1.0.4.107, I decided to utilize the multiple input functionality and connect my Series 2 TiVo to the RF connection.

The input switching/streaming works fine, but I am unable to get the remotes for both devices to save. If I set up a remote for the new device (RF - Series 2 Tivo, address "1"), there is no option to bring up a remote. If I then go back through the A/V setup and set up a remote for the Composite input (Composite - Series 1 Tivo, address "2"), when I switch back to the RF input there is no option to bring up a remote.

So, in summary it looks like whatever was set up last is saved, while the other one goes away. I can report that if I go back through the remote setup the proper device and code is selected, so the Slingbox is definitely remembering what remote to use ... it just isn't "active" and available for selection for some reason.

Is this capability offered in the software and I am doing something wrong, or is this not implemented yet?

- Nick