Previous Thread
If you set it back to the default unit code, you should be able to use SAT/1377 to control it (as long as you have the PL version of the Slingbox, ie, Blaster version 2.1)
Categories: Cable / Satellite Boxes
R10 Code?
Member
- member since: 09/22/2005
- rank: 310 of 27627
- 2 articles authored
- 3 forum threads started
- 72 comments
October 29, 2005 11:04 AM
November 25, 2005 2:54 AM
I tried SAT/1377 and its not working. During setup it won't even allow me to test the button underneath the video screen; the button remains "unavailable." I would like to add that my ir version says 3.0. Please help.
Member
- member since: 09/22/2005
- rank: 310 of 27627
- 2 articles authored
- 3 forum threads started
- 72 comments
November 25, 2005 10:18 AM
What's the first 3 numbers of your serial number? (It should be something like 507, 508, 509, etc)
November 26, 2005 5:11 AM
I would like to add that I have two directivo boxes. A samsumg SIR-S4080R and a Directv R10. If you could help me get either one of them to work with my slingbox, I would greatly appreciate it.
January 24, 2006 2:44 AM
Hi, ashamed to admit but I still don't have a SlingBox. I would like to make sure my setup will work prior to aquiring it.
I have a DirecTV R10 DVR. How will I connect to it during the setup ? Is that done automatically or do I need to provide a code ? looking at what you guys wrote above , is this code clear ?
Thanx guys
January 24, 2006 11:31 AM
The R10 is supported. Just follow the setup steps during installation and you should be able to pick the proper remote. The DirecTV DVR with Tivo selection will work.
-
Carl
January 24, 2006 12:03 PM
I now concur with Carl. I had to return my slingbox and my replacement is now working perfectly.
January 24, 2006 3:39 PM
Thanx Guys. It looks like I will not be ashamed no more. I'm just about to start Slinging on.
Thanx again guys.
January 24, 2006 3:41 PM
Hey Guys,
I posted this in another forum but was not replied. Perhaps you can help with this as well:
Any idea whether SlingPlayer works with Omega Display drivers ? I read in an early forum that it didn't. Is this ok by now ?
Thanx.
February 1, 2006 10:01 PM
Hi,
I see that there are the following IRs supported for DirecTV with Tivo. It's:
DirecTV with Tivo
DirecTV with Tivo ( remote address 1 )
DirecTV with Tivo ( remote address 2 )
DirecTV with Tivo ( remote address 3 )
DirecTV with Tivo ( remote address 4 )
What is the difference between these ?
Thanx.
Sagig
February 1, 2006 11:28 PM
Tivo DVR's have the ability to have different IR codes from each other, so that you can set two or more up in the same room and not have the remote interfere with each other.
-
If you have a DirecTV with Tivo and have never changed the IR code for that reason, just use the basic or default one.
-
Carl
Add Your Reply
Sponsored Links
Copyright © 2008
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
Drobo Space |
DVR playground |
MediaSmart Home |
Monster Community |
MotoDash |
My DigitalEntertainer |
My Open Router |
Presto Place |
Robo Community |
Sansa Community |
Sling Community |
TechLore |
TiVo Community
Slingbox™ is a trademark of Sling Media, Inc. SlingCommunity.com is not affiliated with Sling Media, Inc.
I have an R10 direct tivo that is set to remote 2. Is there a code. I have tried most if not all of the direct tv and dvr codes and none seem to work?
any help woudl be appreciated.