Previous Thread
Two things to try. Make sure the cables are plugged all the way in if they are try another cable. Make sure your channel on the VCR output is selected to channel 3 and 4 and it matches on your SB.
- Blackberry 8830
- Sling Pro
I have a very old VCR player with even older VHS tapes. I would like to view the tapes via my Slingbox solo. So I disconnected the HDTV cable box and connected the red-white-yellow from VCR out to Slingbox red-white-yellow-input. On my sling player, I get the "no video signal detected" , but I do have sound.
Member
- member since: 03/19/2008
- rank: 1086 of 44420
-
location:
Canada
- 18 forum threads started
- 94 comments
October 25, 2008 6:57 PM
October 25, 2008 8:15 PM
Make sure to configure the Composite input on the Solo. You can't just switch out the cables on the back without first configuring, then selecting, the Composite video input on the slingplayer software. Slingplayer is probably still displaying what is connected to the component jacks (which in this case is nothing)
October 27, 2008 8:29 PM
Thanks, that was the solution. I had never config'ed the box before. It took me a while to get the password in order to test your advice.
Add Your Reply
Sponsored Links
Copyright © 2010
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
MediaSmart Home |
MotoDash |
My DigitalEntertainer |
My Open Router |
Pogoplugged |
Robo Community |
Sansa Community |
Sling Community |
TechLore |
TiVo Community |
TouchSmartDevZone
Slingbox™, SlingPlayer™, & SlingCatcher™ are trademarks of Sling Media, Inc. SlingCommunity.com is not affiliated with Sling Media or it's parent company,
